Highest Quality Parts that meet or Exceed Manufactures Specification with a 100% Satisfaction Guarantee!
Big Savings over O.E.M. Replacement parts! KP* and CHUB* are registered trademarks (U.S. Reg. No. 765,025 and 3,104,384) owned by R.A. Jones & Co.
Stone Enterprises machines and produces higher than OEM standard replacement parts for the processing industry.
Stone Enterprises has all your replacement parts on hand and can many times have them shipped out to you within 24 hours. If you don’t see what you need please give us a call at (402) 502-8100.
DOWNLOAD PRINTABLE PDFShowing 101–164 of 164 results
| Part Number | Part Description |
|---|---|
| KPC-007-53810-040 |
|
| KPC-007-53810-050 |
|
| KPC-007-53810-050-D |
Cut Off Punch – Upper **** |
| KPC-007-53810-120 |
|
| KPC-007-53810-130 |
Cutoff Punch – Lower |
| KPC-007-53810-140 |
Cut off punch – Lower |
| KPC-007-53810-150 |
|
| KPC-007-53810-150-D |
Cut Off Punch – Lower **** |
| KPC-007-60238-000 |
bevel pinion gear |
| KPC-007-60408-RP |
Heater, Repair (KT) |
| KPC-007-60610-000 |
|
| KPC-007-60616-000 |
|
| KPC-007-60616-000-SPC |
Right Hand Crank Pin – Special |
| KPC-007-60634-000 |
|
| KPC-007-60635-000 |
|
| KPC-007-60650-020 |
|
| KPC-007-60650-040 |
|
| KPC-007-60671-000 |
K PAK PART D2 122.4X1.397X25.273 |
| KPC-007-60701-000 |
|
| KPC-007-60702-000 |
|
| KPC-007-60703-000 |
|
| KPC-007-60704-040 |
Cut off Punch – Upper .120 x 1.5 |
| KPC-007-60704-140 |
|
| KPC-007-60722-000 |
Lower Cut-Off V-Cam |
| KPC-007-60746-000 |
|
| KPC-007-60821-000 |
Stud |
| KPC-007-60869-200 |
Film Pull Wheel – Large |
| KPC-007-60869-200-RP |
Film Pull Wheel – Large (repair) |
| KPC-007-61011-000 |
Knob, 2′ round al knurled threaded thru |
| KPC-007-63055-010 |
|
| KPC-007-63055-010-RMW |
Heater, 2-row coil assy W/OUT muffler |
| KPC-007-63055-010-RP |
Heater, 2-row coil assy/2.5″ muffler(repair)(KT) |
| KPC-007-63055-010-RP-W |
Heater, 2-row coil assy/2.5 muffler repair, L-Tube cut to customer specs |
| KPC-007-63055-020 |
|
| KPC-007-63055-020-RP |
Heater, 1-row coil assembly(Repair)(KT) |
| KPC-007-63055-020-RP-W |
Heater, 1-row coil assy/2.5 muffler repair, L-Tube cut to customer specs |
| KPC-007-63055-101-RP |
Heater, 2-row coil assy/2/5″ muffler (repair) |
| KPC-007-71251-000 |
Bracket Film Drive |
| KPC-007-73278-000-B |
Bronze Bushing (Replace Black) |
| KPC-007-73290-010 |
Stainless Reducer |
| KPC-007-74601-000 |
Film Wheel- Stainless Steel |
| KPC-007-74601-000-RP |
Recoat/Repair Film Wheel |
| KPC-044-200-90300 |
1hp 56c ss motor |
| KPC-044-521-67980 |
Voider Drive Shaft Bushing |
| KPC-044-521-69010 |
bronze bearing |
| KPC-044-52184-000 |
sleeve bushing |
| KPC-044-530-00700 |
|
| KPC-044-540-25000 |
thrust bearing |
| KPC-044-550-43855 |
belt |
| KPC-044-580-38800 |
1 1/2 clamp |
| KPC-044-610-00270 |
seal bar cylinder |
| KPC-044-610-02260 |
wire feed cylinder |
| KPC-044-610-02630 |
film drive cylinder |
| KPC-044-610-30160 |
cylinder |
| KPC-044-770-56260 |
belt pulley |
| KPC-044-890-00870 |
valve |
| KPC-044-89056-400 |
exhaust valve |
| KPC-044-990-10651-SS |
manetic door catch made of stainless |
| KPC-044-990-90720 |
1/8 muffler |
| KPC-044-990-90750 |
1/4″ muffler |
| KPC-95-500-2270-50 |
Shoulder Bolt |
| KPC-FILM FOLDER-RP |
Film Folder Repair |
| SE0951 |
Trunion End |
| SE0952 |
Cylinder Base |
